#59910
3M™ Glass Bubbles K1
hollow glass microspheres, very light, high volume filler, average grain size 46 µ, largest bubbles 200 µ
Buy 3M™ Glass Bubbles K1:
Ordering information
Please read the material safety data sheet (MSDS).
Handling and Warnings
Caution: avoid contact with eyes! Wear tightly sealed safety glasses!
No ACMI Certification Seals available.
Warnings
WARNING: Exercise care when using dry pigments. Do not eat, drink or smoke. Avoid breathing dust. Use a NIOSH-certified dust respirator. Wash hands immediately after use. If creation of dust is likely, wear protective clothing.
Precautions
Keep out of reach of children.
Especially for colorants and stuccos. Scotchlite glass beads are made of borosilicate glass with low alkali content, so they can be mixed with cement. They have an average volume of 8 l/kg, making them an economical solution for the application of light loads. At 125 gr. of ground glass per liter of mortar, the specific gravity of the mortar can be divided by two. This ground glass is an exceptional heat and temperature insulator.
Downloads
- Chemical description: Soda lime borosilicate glass
- Suitability: Acrylics, Cement / Tadelakt, Lime / Fresco, Silicate binder, Waterglass
- Colors: White
- Forms: powder
- Solubility in water: insoluble
-
For which application / techniques is 3M™ Glass Bubbles K1 suitable?
3M™ Glass Bubbles K1 is suitable for Cement / Tadelakt, Silicate binder, Waterglass, Acrylics, Lime / Fresco -
What color has 3M™ Glass Bubbles K1?
3M™ Glass Bubbles K1 has the color White.