Back

Recipe: Textile Color, with Redwood Extract

Lilac to Eggplant

Preparation: The fabric should be washed as hot as possible. I.e. wool and silk with wool detergent at approx. 30°C and cotton and linen at up to 90°C.

Put the washed, damp fiber into the mordant bath and leave it for 12 hours or even longer. Move gently from time to time. Rinse well and place still damp in the prepared dye bath.

Processing

Step 1: Stir 20-30 g Redwood Extract (#36160) into 2-3 l cold water. Place the textile fiber in the cold decoction and heat to max. 80°C. Keep the pot at this temperature for about one hour.
Step 2: Either let the textile fiber rest in the bath for some time or remove it immediately after cooling.
Step 3: Either dry unwashed and rinse afterwards or rinse and wash immediately. The oxidation process while drying helps to fix the dye.

Ingredients

20-30 g Redwood Extract (#36160)
2-3 l Water
Textile fiber
Dye bag
Pot
Thermometer

Additional Information

Mordanting Plant fibers
Mordanting Animal fibers

Note

Dyeing Results: The type of mordant as well as treatment duration have a decisive influence on the dyeing result. Our recipes always aim at the full color shade. Corresponding lighter shades can be achieved by reducing the plant dye and/or diluting the dye bath with water. It is also possible to increase the amount of fabric, but this implies adjusting the quantity of dye bath so that all fibers are covered.

Cleaning: Cleaning pots works best with hot water and citric acid (#64150).

We assume no liability for the processing instructions described above. In any case, we recommend the production and evaluation of sample surfaces.

Product list