Recipe: Silicate-Dispersion-Paint with Syton X 30
This binding medium is very suitable for ceramic surfaces, indoor and outdoor concrete. Do not use in wet areas.
Processing
Step 1: Mix the binding media and stir them well.
Step 2: Use only pigments which are stable in potassium silicate. Add the pigments in small portions to the binding medium solution, stir well, until you get a smooth paint with a viscosity like coffee cream. If the paint gets too thick, thin it with the binding medium.
Step 3: Make sure to test the paint prior to applying the paint. In case the paint is chalking, add more binding medium.
Note
Minimum film forming temperature: 5°C. Estimated consumption: approx. 120 ml / m²
We assume no liability for the processing instructions described above. In any case, we recommend the production and evaluation of sample surfaces.
